Recently, the us department of energy (DOE) released on integral LED lights (LED lamp) integrated test program of the federal register. Asked the integral LED lamp to enter the United States must, in accordance with the requirements of this test in qualified lab for relevant test, in order to get the total luminous flux, the input power, lights, correlated color temperature, color rendering index, power factor, life and standby power, such as data.

The regulations take effect on August 1, 2016, December 28, 2016, enforced. According to the requirements of the law of above parameters according to the LM - 79 respectively, and the test need LM - 84, TM - 28 and IEC6 2301 standards.

In addition, from August 1, 2016, DOE controls LED Lighting Facts label (color labeling) will be suspended to accept all OF the new replacement Lamps submitted, because new one-piece LEDLamps DOE test program: DEPARTMENT OF ENERGY, 10 CFR Parts 429 and 430 [Docket No. EERE - 2011 - BT - TP - 0071] to take effect on August 1, 2016. And DOE is aimed at the one-piece LEDLamps officially released the one-piece LEDLamps test procedure.

Any before August 1, 2016 to submit application for the column will continue to deal with. In view of the current have DOE LED Lighting Facts listed products remain in the network Database in the Database. The LED Lighting Facts will be according to the latest DOE provisions of the working party further investigation and research, once has the final decision will be immediately notify all partners.

DOE LED Lighting Facts will continue to accept the LED lamps and lanterns and renovated suite.

DLC has revised its about LED Lighting Facts, starting from August 1, 2016, will no longer be required to submit their bare tubes of LM - 79 data to the LED Lighting Facts. Please note that DLC will continue to accept the tube's application for certification. This change does not affect the DLC LEDLightingFacts for other categories product requirements.

About the DOE LED Lighting Facts:

DOE LED Lighting Facts is the U.S. department of energy (DOE) DOE for LEDSSL solid general Lighting products (including: one-piece LED bulbs, the one-piece LED bulbs, LED lamps, LED retrofit kit) voluntary energy efficiency label certification program. Through the project, LED manufacturers authorized can submit samples in lab according to the standard of IESNALM - 79-08 and other industrial testing, submit the report after get DOE LED Lighting Facts, names, which showed his excellent product performance.

Update to the latest standards of the north American express - UL standard 1993

At present, along with an increasing number of leds (TypeA/B/C), LED the filament lamp, LED module from drive continuously introduce new products, such as UL according to the standard of new products, new technology to update the related technical requirements. UL certification requirements and latest LED light source products UL standard 1993 update dynamically